One of my son's Brunswick High School Rugby team mates recently lost his life in an auto accident along with 3 other Brunswick teens. My son's team mate, Kevin Fox, was an organ donor and helped save 8 people through his donation. I will be participating in Lifebanc's 2012 Walk for Life with "Team Fox" in August in honor of this incredible young man. If you would like to donate, please click on the "I support a worthy cause" link above. Thank you.
http://fox8.com/2012/06/09/brunswick-teens-family-give-emotional-tributes-at-funeral/
Ceramic Artist Beverly Marusa shares ceramic and pottery making tips, marketing fine craft links and information, ceramic artist links, ceramic reference materials, and much more with a focus on the emerging ceramic artist.
Sunday, June 10, 2012
Saturday, February 25, 2012
My Apologies and Gratitude
Thank you to all who continue to visit this blog. It has been a busy year for me and I apologize for the lack of posts. In the upcoming months, I will try to get online more frequently and continue to post my research finds, and experimentation results. Again, thank you to all who have supported this blog. I have been overwhelmed by and thankful for the number of visitors in the past months.
Using an Iron Oxide Wash
I have received a few comments about the iron oxide wash recipe that I had posted earlier. Typically, when I've used this wash, I had painted it on green ware prior to the bisque firing concentrating on those areas that I wanted to appear darker. Most recently, I used the wash on a series of magnets that I had done for wedding shower favors. The magnets were small cookie cutter hearts with impressed scroll designs. I painted the wash into the impressed areas and, while wearing a mask, lightly sanded the areas in which I did not want the darker colorant. I had used a beautiful speckled cone six clay and preferred not glazing on top of the wash.
I have also used this wash in the past on green ware, bisque fired, and then glazed on top. The areas with the wash appeared darker where the iron oxide had bled through, however, this this technique may not be used with all washes as different colorants and glazes may act differently when glaze is applied over the wash.
Of course there are other ways to use washes. Here's some links that may help:
An article on using oxides on the Big Ceramic Store website and another on the Glendale College website,
http://www.bigceramicstore.com/information/tip12.htm
http://seco.glendale.edu/~rkibler/oxidepainting.html
Oxide wash recipes on Potters.org
http://www.potters.org/subject06350.htm/
I have also used this wash in the past on green ware, bisque fired, and then glazed on top. The areas with the wash appeared darker where the iron oxide had bled through, however, this this technique may not be used with all washes as different colorants and glazes may act differently when glaze is applied over the wash.
Of course there are other ways to use washes. Here's some links that may help:
An article on using oxides on the Big Ceramic Store website and another on the Glendale College website,
http://www.bigceramicstore.com/information/tip12.htm
http://seco.glendale.edu/~rkibler/oxidepainting.html
Oxide wash recipes on Potters.org
http://www.potters.org/subject06350.htm/
Subscribe to:
Posts (Atom)